FEATURES OF ACCEPTANCE OF MEASURING EQUIPMENT WITH SOFTWARE FOR TESTING OF WEAPONS AND MILITARY EQUIPMENT

Authors

  • V. Borsch
  • O. Vervejko
  • P. Arkushenko
  • O. Florin

DOI:

https://doi.org/10.26906/SUNZ.2021.1.031

Keywords:

software of measuring equipment, software testing, technical regulations, types of software, tests, software requirements

Abstract

Software is used in most modern measuring equipment. It can be built-in, autonomous, installed on a computer, which is an integral part of the measuring equipment, which is tasked with obtaining measurement information on quantitative characteristics during testing. When assessing the conformity of modern weapons and military equipment to the tactical and technical task of the customer, the requirements for metrological support increased significantly due to a significant increase in the requirements for accuracy of determining the parameters of weapons and military equipment; constant increase in volume and complexity of measurements; increasing the requirements for efficiency and timeliness of measurements, speed of measuring instruments and control; the need to use, in some cases, complex measuring instruments, with high metrological characteristics, and sometimes unique and / or based on new physical principles. Ukraine's integration into world and European structures, including NATO, and the growing requirements for metrological support determine the urgency of improving and / or clarifying the requirements for metrological testing, in particular the admission to testing of measuring equipment with software, the number of which has increased significantly. The purpose of the article is to analyze the regulatory documentation and regulations of Ukraine in the field of metrology and metrological activities, taking into account recent changes and substantiation on its basis of a set of measures for admission of measuring equipment with software for testing weapons and military equipment. The analysis of normative documentation of Ukraine and recommendations of the international metrological organizations concerning requirements to means of measuring equipment with the software is carried out. The basic generalized requirements which fulfillment is expedient to control at decision-making on the admission of means of measuring equipment to operation or tests are defined. The general rules of admission of measuring equipment with software to tests of armaments and military equipment are highlighted. For testing of the specified software products the regulated characteristics, and also their possible levels are defined. Specific requirements for measuring equipment with software are defined

Downloads

Download data is not yet available.

References

Schwartz Roman WELMEC activities towards harmonized software requirements and software examination for measuring instruments under legal control / Roman Schwartz, ULRICH GROTTKER // OIML bulletin. – July 2000. – Volume XLI. – Number 3. – Р. 22-30.

WELMEC 7.1, Issue 2. Development of Software Requirements. (Informative Document). – Vienna, Austria: WELMEC Secretariat, 2005. – 47 p.

Правила метрологічного забезпечення державної авіації України // Наказ міністра оборони України No 812: 27.11.2013. – 51 с.

Аркушенко, П. Л. Особливості допуску засобів вимірювальної техніки до випробувань озброєння та військової техніки / П. Л. Аркушенко, В. В Борщ, О. І. Вервейко, А. В. Коваленко // Створення та модернізація озброєння і військової техніки в сучасних умовах: Збірник тез доповідей 18 науково-технічної конф. 06-07 вересня 2018 р. /ДНДІ ВС ОВТ. – Чернігів: ФОП Брагинець О.В., 2018.– C. 60-62.

Річна національна програма під егідою Комісії Україна – НАТО на 2020 рік // Указ Президента України від 26.06.2020. – No 203/2020. – 158 с.

ДСТУ 7363:2013. Метрологія. Програмне забезпечення засобів вимірювальної техніки. Загальні технічні вимоги. – Чинний з 2014-01-01. – К.: Мінекономрозвитку України, 2014. – 14 с. (Національний стандарт України).

Зіангирова, Л. Т. Метрологічна атестація програмного забезпечення засобів вимірювань / Л. Т. Зіангирова, В. В. Друмов, Г. І. Бірюков // Збірник наукових праць ОДАТРЯ. – 2016. – No1 (8). – С. 42-45.

П.И. Неежмаков, П. И. Аттестация программного обеспечения средств измерительной техники / П.И. Неежмаков, С.И. Зуб, С. М. Пивненко // Метрология. – 2012. – С. 611-614.

Олеськів О. Метрологічна перевірка програмного забезпечення засобів вимірювання з різними структурами / О. Олеськів, І. Микитин // Вісник Національного університету "Львівська політехніка". Комп’ютерні науки та інформаційні технології. – 2015. – No 826. – С. 325-330.

Рулева, Е. В. Формирование требований к программному обеспечению средств измерений // Вестник Пензенского государственного университета. – 2015. – No 4 (12). – С. 134-139.

WELMEC 7.2:2019. Issue 9. Software Guide (Measuring Instruments Directive 2014/32/EU1). – Vienna, Austria: WELM Vienna, Austria EC Secretariat: 2019. – 132 с.

WELMEC 2.3, Issue 3. Guide for Examining Software. (Non-avtomatic Weighing Instruments). – Vienna, Austria: WELMEC Secretariat, 2005. – 23.

Про метрологію та метрологічну діяльність: Закон України від 05.06.2014 No1314-VIII // Відомості Верховної Ради України. – 2014. – No 30. – Cт. 1008. – 18 с.

Технічний регламент засобів вимірювальної техніки // Постанова Кабінету Міністрів України No 163. – 24.02.2016. – 153 с.

Технічний регламент законодавчо регульованих засобів вимірювальної техніки // Постанова Кабінету Міністрів України No 94. - 13.01.2016. - 59 с.

Технічний регламент щодо неавтоматичних зважувальних приладів // Постанова Кабінету Міністрів України No 1062. – 16.12.2015. – 34 с

Перелік національних стандартів, відповідність яким надає презумпцію відповідності засобів вимірювальної техніки суттєвим вимогам Технічного регламенту законодавчо регульованих засобів вимірювальної техніки, затвердженого постановою Кабінету Міністрів України від 13.01.2016 No 94 // Наказ Міністерства економічного розвитку і торгівлі України No 717. - 23.04.2019. – 55 с.

ДСТУ OIML D 31:2018 (OIML D 31:2008, IDT). Загальні вимоги до засобів вимірювальної техніки з програмним керуванням. - Чинний від 2018-01-01.- К. : Мінекономрозвитку України, 2018. - 53 с. (Національний стандарт України).

Published

2021-02-26