Strengthening of the cross-section of steel i-beams in the tension zone: a review of scientific research
DOI:
https://doi.org/10.26906/znp.2024.63.3871Keywords:
steel beam structural elements, repair and strengthening, cross-section increase, a review, scientific researchsAbstract
The article reviews scientific research on methods and means of strengthening steel beam structural elements by increasing (building up) cross-sections using additional elements made of steel rolled profiles, plates, reinforcing bars and plates made of polymeric materials. The main conclusions and directions of further scientific research on effective methods and means of strengthening steel beam structural elements by increasing (building up) their cross-sections, which have the potential for widespread use in the repair and reconstruction of buildings and structures, are substantiated.
References
1. DBN B V.3.1-2:2016. (2017). Structures of buildings and structures. Steel-reinforced concrete structures. Basic provisions. Ministry of Regional Development of Ukraine. Kyiv: Minregion Ukraine. (in Ukrainian)
2. Yang, J., Wadee, M. A., & Gardner, L. (2025). Strengthening of steel I-section beams by wire arc additive manufacturing – Concept and experiments. Engineering Structures, 322, 119113. https://doi.org/10.1016/j.engstruct.2024.119113 DOI: https://doi.org/10.1016/j.engstruct.2024.119113
3. Yang, J., Wadee, M. A., & Gardner, L. (2025). Residual stresses in steel I-section beams strengthened by wire arc additive manufacturing. Journal of Constructional Steel Research, 232, 109606. https://doi.org/10.1016/j.jcsr.2025.109606 DOI: https://doi.org/10.1016/j.jcsr.2025.109606
4. Ghafoori, E., & Motavalli, M. (2015). Lateral-torsional buckling of steel I-beams retrofitted by bonded and un-bonded CFRP laminates with different pre-stress levels: Experimental and numerical study. Construction and Building Materials, 76, 194–206. http://dx.doi.org/10.1016/j.conbuildmat.2014.11.070 DOI: https://doi.org/10.1016/j.conbuildmat.2014.11.070
5. AbouEl-Hamd, O. R., Sweedan, A. M. I., El-Ariss, B., & El-Sawy, K. M. (2023). Experimental and numerical investigation of the behavior of steel beams strengthened by bolted hybrid FRP composites. Buildings, 13(3), 824. https://doi.org/10.3390/buildings13030824 DOI: https://doi.org/10.3390/buildings13030824
6. Wang, S., Li, L., Su, Q., Jiang, X., & Ghafoori, E. (2023). Strengthening of steel beams with adhesively bonded memory-steel strips. Thin-Walled Structures, 189, 110901. https://doi.org/10.1016/j.tws.2023.110901 DOI: https://doi.org/10.1016/j.tws.2023.110901
7. Linghoff, D., Al-Emrani, M., & Kliger, R. (2010). Performance of steel beams strengthened with CFRP laminate – Part 1: Laboratory tests. Composites Part B: Engineering, 41(7), 509–515. https://doi.org/10.1016/j.compositesb.2009.05.008 DOI: https://doi.org/10.1016/j.compositesb.2009.05.008
8. Liu, Y., & Gannon, L. (2009). Experimental behavior and strength of steel beams strengthened while under load. Journal of Constructional Steel Research, 65(6), 1346–1354. https://doi.org/10.1016/j.jcsr.2009.01.008 DOI: https://doi.org/10.1016/j.jcsr.2009.01.008
9. Ridha, S., Abbood, A., & Atshan, A. (2020). Evaluating the efficiency of strengthening hot-rolled I-sectioned steel beams by using additional plates and inclined stiffeners with various widths. In IOP Conference Series: Materials Science and Engineering, 870(1). IOP Publishing. https://bit.ly/44S2dT2 DOI: https://doi.org/10.1088/1757-899X/870/1/012102
10. Yossef, N. (2015). Strengthening steel I-beams by welding steel plates before or while loading. International Journal of Engineering Research & Technology, 4(07). https://bit.ly/44XiINw
11. Al-Balhawi, A., Shubber, A. N., Al-Asadi, L. S. M., Ibrahim, S. K., Hacheem, Z. A., Jassem, N. H., Dheyab, L. S., & AL-Ridha, A. S. D. (2022). Assessing the structural behavior of steel beams strengthening with additional plates. Materials Today: Proceedings, 62, 4562–4566. https://doi.org/10.1016/j.matpr.2022.05.304 DOI: https://doi.org/10.1016/j.matpr.2022.05.304
12. Kushnir, Yu. O. (2012). Experimental studies of the strength of steel beams strengthening with horizontal tightenings. Scientific and Technical Collection of KhNAMG: Municipal Utilities. Series: Technical Sciences and Architecture, 105, 168–179. https://khges.kname.edu.ua/index.php/khges/article/view/837/831
13. Mohammadzadeh, M., & Bhowmick, A. (2022). Behavior of steel I-beams reinforced while under load. In Lecture Notes in Civil Engineering (pp. 67–79). Singapore: Springer Singapore. https://doi.org/10.1007/978-981-19-0656-5_6 DOI: https://doi.org/10.1007/978-981-19-0656-5_6
14. Mohammadzadeh, M. (2022). Behaviour of steel I-beams reinforced while under load (PhD thesis). Concordia University, Montreal, Canada. https://spectrum.library.concordia.ca/id/eprint/991496/1/Mohammadzadeh_PhD_S2023.pdf
15. Taoum, A., Jiao, H., & Holloway, D. (2015). Using locally pre-stressed reinforcing bars to restore the capacity of severely damaged steel beams. International Journal of Steel Structures, 15(1), 125–134. https://doi.org/10.1007/s13296-015-3009-1 DOI: https://doi.org/10.1007/s13296-015-3009-1
16. Taoum, A., Jiao, H., & Holloway, D. (2015). Upgrading steel I-beams using local post-tensioning. Journal of Constructional Steel Research, 113, 127–134. https://doi.org/10.1016/j.jcsr.2015.06.012 DOI: https://doi.org/10.1016/j.jcsr.2015.06.012
17. Szewczyk, P., & Szumigała, M. (2021). Optimal design of steel–concrete composite beams strengthened under load. Materials, 14(16), 4715. https://doi.org/10.3390/ma14164715 DOI: https://doi.org/10.3390/ma14164715
18 El-Zohairy, A., & Salim, H. (2017). Parametric study for post-tensioned composite beams with external tendons. Advances in Structural Engineering, 20(10), 1433–1450. https://doi.org/10.1177/1369433216684352 DOI: https://doi.org/10.1177/1369433216684352
19. Izbash, M. (2008). Locally prestressed steel-reinforced concrete structures for new construction and reconstruction (Abstract of the Doctoral thesis). Kharkiv, Ukraine. http://lib.kart.edu.ua/bitstream/123456789/05985/1/aref_Izbash.pdf
20. Shemet, R. (2007). Steel-reinforced concrete continuous locally prestressed beams (Candidate of Technical Sciences thesis). Technical University of Construction and Architecture, Kharkiv, Ukraine. http://lib.kart.edu.ua/handle/123456789/6866
21. Galinska, T., Pents, V., & Kushnir, Y. (2014). Strengthening of steel-concrete beams with prestressed tensioning during the reconstruction of buildings and structures. In Proceedings of the IV International Conference “Construction, Reconstruction and Restoration of Municipal Buildings” (pp. 24–27). https://eprints.kname.edu.ua/38928/1/КНИГА%20по%20конференции2014.pdf
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Andriy Reka, Tatiana Galinska, Dmutro Ovsii, Mukhlis Hajiyev
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Published 2024-12-18
