SPATIAL STRUCTURES OF CLOSED PROFILES
DOI:
https://doi.org/10.26906/znp.2017.48.787Keywords:
steel truss, arch, frame, box-shaped sectionAbstract
The article presents a new design of steel space trusses, arches, frames of complex application, the main advantages of which are lightness, durability of plane, cost efficiency, reliability, reduction of construction period and investment cycle, energy savings at manufacture, transportation and construction. Based on the previously performed experimental and theoretic studies, the expediency of using box-shaped section parallel chord trusses has been proved. Therefore, new constructive decisions for light efficient trusses, arches, frames that can be used at erection of civil and industrial objects are presented below. The suggested efficient structure of a steel truss with spatial upper chord, using tubes or rectangular hollow box-shaped sections, steel trifurcate spatial truss construction, spatial arch truss, spatial arch. Considered the use of closed cross-sections for spatial arch elements. It has been revealed that using the two-hinges spatial frame the construction cost of a building can be reduced due to reducing of the basement’s dimensions.
References
Бирюлев В. В. Стальные фермы с коробчатыми сечениями стержней, сваренных из уголков / В. В. Бирюлев // Известия вузов. Серия: Строительство и архитектура. − 1973. − С. 8 − 14.
Biryulyov V. V. Steel trusses with box-shapedsections of chords welded of cleats / V. V. Biryulyov // Higher School News, Series: Construction and Architecture. − 1973. − P. 8 − 14.
Металлические конструкции: Справочник проектировщика / Под ред. Н. П. Мельникова. − М. : Стройиздат, 1980. − 776 с.
Metal structures: Designer’s reference / Under the editorship of N. P. Melnikov. – M. :
Stroyizdat, 1980. – 776 p.
Абаринов A. A. Особенности работы и расчета ферм из труб / A. A. Абаринов, Н. Б. Козьмин, А. Ф. Кузнецов // Промышленное строительство. – 1970. – № 6. – С. 32 – 36.
Abarinov A. A. Features of behaviour and calculation of tube trusses // A. A. Abarinov, N. B. Kozmin, A. F. Kuznetsov // Industrial construction. – 1970. – № 6. – P. 32 – 36.
Павлов А. Б. Методологические основы современной системы принципов формообразования строительных конструкций / А. Б. Павлов, В. М. Фридкин // Архитектура и строительство. − М. : Академия, 2010. − № 1. − С. 70 − 73.
Pavlov A. B. Methodological fundamentals of the present-day building structures shape
forming principles system / A. B. Pavlov, V. M. Fridkin // Architecture and construction. – M. : Academia, 2010. − No 1. − P. 70 − 73.
Типизация и стандартизация металлических конструкций / В. В. Кузнецов, В. В. Ларионов, Б. Г. Павлов и др. // ЦНИИпроектстальконструкция им. Мельникова: сборник научных трудов. – М., 1987. – 133 с.
Typing and standardizing of metal structures / V. V. Kuznetsov, V. V. Larionov, B. G. Pavlov et al. // Melnikov CNII Proektstakonstruktsia: сollection of research papers. – Moscow, 1987. – 133 p.
Металлические конструкции / Ю. И Кудишин, Е. И. Беленя, В. С. Игнатьева и др. – М. : Академия, 2010. – 688 с.
Metal structures: / Yu. I. Kudishin, Ye. I. Belenya, V. S. Ignatyeva et al. – M. : Academia, 2010. – 688 p.
ISBN: 978-5-7695-6706-3.
Пічугін С .Ф. Застосування комбінованих арочно-стрижньових елементів в плоских конструкціях / С. Ф. Пічугін, В. П. Чичулін, К. В. Чичуліна // Ресурсоекономні матеріали, конструкції, будівлі та споруди: зб. наук. пр. − Рівне: НУВГП, 2014. – Вип. 28. −
С. 399 − 404.
Pichugin S. F. Using combined arch and chord elements in flat structures /
S. F. Pichugin, V. P. Chichulin, K. V. Chichulina // Resource saving materials, structures, buildings and constructions: collection of research papers. – Rivne: NUVGP, 2014. – Issue 28. – P. 399 − 404.
ISSN: 2218-1873.
Пат. 98332 Україна, МПК (2006) Е 04 С 3/02. Ресурсоекономна комбінована металева кон¬струкція / Пічугін С. Ф., Чичулін В. П., Чичуліна К. В.; власник: Полтавський національний технічний університет ім. Юрія Кондратюка. – № u201411961; заявл. 05.11.2014; опубл. 27.04.2015.
Patent 98332 Ukraine, IPC (2006) Е 04 С 3/02. Resource-saving combined metal structure / Pichugin S. F., Chichulin V. P., Chichulina K. V.; Holder: Poltava National Technical Yuri Kondratyuk University. – № u201411961; submit. 05.11.2014; publ. 27.04.2015.
Пат. 98331 Україна, МПК (2006) Е 04 С 3/02. Комбінована металева конструкція ферми / Пічугін С. Ф., Чичулін В. П., Чичуліна К. В.; власник: Полтавський національний технічний університет ім. Юрія Кондратюка. – № u201411960; заявл. 05.11.2014; опубл. 27.04.2015.
Patent 98331 Ukraine, IPC (2006) Е 04 С 3/02. Truss combined metal structure / Pichugin S. F., Chichulin V. P., Chichulina K. V.; Holder: Poltava National Technical Yuri Kondratyuk University. – № u201411960; submit. 05.11.2014; publ. 27.04.2015.
Plate-Girder Construction (Classic Reprint) // Isamu Hiroi. – Publisher «book on demand»,
– 116 p.
ISBN: 9781332027699.
Notes on Plate-Girder Design (Classic Reprint) // Clarence W. Hudson. – Publisher «book on demand», 2015. – 96 p.
ISBN: 9781177410045.
Mechanics of the Girder // John Davenport Crehore. – Publisher «book on demand», 2015. – 594 p.
ISBN: 9781332336340.
Modified method of Prestressing Steel Trusses by inducing Lack of fit // Ponnada Markandeya Raju and Thonangi Raghuram Sandeep. – LAP Lambert Academic Publishing, 2012. – 168 p.
ISBN: 9783659317743.
Chord Bearing Capacity in Long-span Tubular Trusses // Brian Kozy. – Scholars' Press,
– 172 p.
ISBN: 9783639515541.
Advanced Analysis of Steel Frames // Huu-Tai Thai. – Scholars' Press, 2012. – 180 p.
ISBN: 9783639510171.